The Patton SN200 can be configured as an analog gateway using a configuration file, which you can download below. To adapt the configuration to your peoplefone connections, open the file in a text editor and edit the variables “SIPUSERNAMEPORT1”, “SIPUSERNAMEPORT2”, “SIPPASSWORDPORT1” and “SIPPASSWORDPORT1” with the corresponding SIP user data from your customer account. Then upload the configuration to the Patton web interface under Systems → Configuration Files and activate it. We recommend restarting the device afterwards. In the main view of the Patton web interface, you should now see the registered SIP connections in green on the right-hand side. In the peoplefone portal, the corresponding SIP lines should also be displayed in green as online.

#----------------------------------------------------------------#

Configuration DHCP 2 Ports

#----------------------------------------------------------------#

cli version 4.00 snmp shutdown

actions

rule PROV_STARTUP condition ip address:WAN.DHCP LINKUP initial condition system ntp TIME_INITIALIZED action 1 "provisioning execute PF_PROVISIONING_CONFIG"

profile aaa DEFAULT method 1 local rule required method 2 none rule required

console use profile aaa DEFAULT

telnet server use profile aaa DEFAULT no shutdown

ssh server use profile aaa DEFAULT no shutdown

web server protocol http port 80 protocol https port 443 use profile aaa DEFAULT no shutdown

ntp server 0.patton.pool.ntp.org server 1.patton.pool.ntp.org server 2.patton.pool.ntp.org server 3.patton.pool.ntp.org no shutdown

profile napt NAPT_WAN

profile fxs DEFAULT_EU electrical standard etsi caller-id standard fsk-etsi presentation mid-ring

profile fxs DEFAULT_US electrical-standard bell caller-id standard fsk-bell presentation mid-ring

profile voip DEFAULT codec 1 g711alaw64k rx-length 20 tx-length 20 codec 2 g711ulaw64k rx-length 20 tx-length 20

profile sip DEFAULT

context ip ROUTER

interface WAN ipaddress DHCP dhcp ipaddress WAN_STATIC 192.168.200.10 255.255.255.0 use profile napt NAPT_WAN DHCP

routing-table DEFAULT

profile ppp DEFAULT

context cs SWITCH no shutdown

routing-table called-e164 RT_to_SIP route .T dest-interface IF_SIP

routing-table called-e164 RT_to_FXS route SIPBENUTZERNAMEPORT1 dest-interface IF_FXS_00 route SIPBENUTZERNAMEPORT2 dest-interface IF_FXS_01

interface sip IF_SIP bind context sip-gateway GW_SIP route call dest-table RT_to_FXS remote sips.peoplefone.de 5060

interface fxs IF_FXS_00 route call dest-table RT_to_SIP

interface fxs IF_FXS_01 route call dest-table RT_to_SIP

authentication-service AUTH_SVC username SIPUSERNAMEPORT1 password SIPPASSWORTPORT1 username SIPUSERNAMEPORT2 password SIPPASSWORTPORT2

location-service LS domain 1 sips.peoplefone.de match-any-domain

identity-group DEFAULT

authentication outbound authenticate 1 authentication service AUTH_SVC

registration outbound lifetime 300 register auto

identity SIPUSERNAMEPORT1 inherits DEFAULT identity SIPUSERNAMEPORT2 inherits DEFAULT

context sip gateway GW_SIP bind location service LS

interface IF_SIP transport protocol udp+tcp 5060 bind ipaddress ROUTER WAN DHCP

context sip gateway GW_SIP no shutdown

port ethernet 0 0 bind interface ROUTER WAN no shutdown

port fxs 0 0 subscriber-number SIPUSERNAMEPORT1 bind interface SWITCH IF_FXS_00 no shutdown

port fxs 0 1 subscriber number SIPUSERNAMEPORT2 bind interface SWITCH IF_FXS_01 no shutdown